- Packaging Type: Drum,Barrel
- Usage/Application: Industrial Use
- Application: Industrial Use
- Grade Standard: Technical Grade
- Form: Liquid
- Color: Clear
- Physical state: Liquid
Chemtex’s Nalcool 2000 is a multifunctional blend of nitrite based corrosion inhibitors for engine system. It prevents corrosion or rusting of metal by forming a passive coating of protective film on the metal surface. Chemtex’s Nalcool 2000 contains a combination of ferrous and non-ferrous corrosion inhibitor, non-carbonate buffer, scale inhibitor, dispersant and leak detection dye.
Active Components: Nitrite, Nitrate, TT, Borate, Silicate and Polyacrylate for Aluminum, MS, Copper and Cu-alloys Key Features and Benefits
Application and Dosage
- Multi-metal corrosion protection
- Scale prevention
- Saves power more than 30%
- Temperature resistance -29oC to 215oC
- Leakage and burst protection
- Extends system life
- Enhances system efficiency
System Preparation: To remove all dirt deposits, oil and rust particles, run the engine for 24-72 hours with 2ltrs Alstaclean RC50 for every 30ltrs of fresh water/coolant and then drain the dirty solution. Flush engine with fresh water and add fresh water/coolant with Chemtex’s Nalcool 2000 in the indicated ratio (1ltr for every 32ltrs of water/coolant).
Initial dose: Add Chemtex’s Nalcool 2000 - 1ltr for every 32ltrs of water/coolant to maintain a nitrite level of about 1200ppm.
To maintain a correct inhibitor level in the system, it is necessary to always top-up the system with Chemtex’s Nalcool 2000 during make-up requirement of plain water/coolant.
Regular dose (for small system less than 80ltrs): Add Chemtex’s Nalcool 2000 - 1ltr for every 32ltrs of water/coolant after every 20,000kms or 250hours or running.
Regular dose (for large system above 80ltrs): Add Chemtex’s Nalcool 2000 - 1ltr for every 80ltrs of water/coolant at every routine service.
Shelf life in use: Chemtex’s Nalcool 2000 should be drained and flushed once every yearHandling Measures and Precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.Packing
CHEMTEX’S NALCOOL 2000 is available in HDPE containers of various sizes.Keywords
NALCOOL 2000, Diesel Engine Corrosion Inhibitor, Nitrate Corrosion Inhibitor.